Ranger 2WD L4-153 2.5L SOHC VIN C SFI (1998)
14. Remove the bearing caps and bolts.
-
To establish differential bearing preload, increase both left and right shim sizes by the specification shown in the illustration.
-
Use a shim driver to ensure the differential bearing shims are fully seated and the assembly turns freely.
15. Install the bearing caps and bearing cap bolts.
16. Use the Dial Indicator with Bracketry to recheck the backlash.
-
For further adjustments.
17. Install the axle shafts.
18. Install the driveshaft if removed.
19. Install the axle housing cover and refill the rear axle with specified lubricant.
