Ranger 2WD L4-153 2.5L SOHC VIN C SFI (1998)
2. Remove the 10 ring gear bolts.
3. Insert a punch in the bolt holes and drive the ring gear off.
CAUTION: Care should be taken not to damage the ring bolt hole threads.
4. Remove the speed sensor ring if required.
NOTE: The anti-lock speed sensor ring cannot be reused once removed.
5. Use the 2-Jaw Puller for Differential Case Bearings and the Step Plate Adapter to remove the differential bearing.
-
Repeat for the other side.
6. Remove the differential pinion shaft lock bolt and remove the differential pinion shaft.
