Ranger 2WD L4-153 2.5L SOHC VIN C SFI (1998)
1. Lubricate the new rear wheel bearing.
-
Use Thermally Stable Rear Axle Lubricant XY-80W90-QL or equivalent meeting Ford specification WSP-M2C197-A.
2. Use the Axle Tube Bearing Replacer with Driver Handle to install the rear wheel bearing.
3. Lubricate the lip of the new inner wheel bearing oil seal. Use Premium Long-Life Grease XG-1-C or equivalent meeting Ford specification
ESA-MlC75-B.
4. Use the Axle Tube Seal Replacer with Driver Handle to install the inner wheel bearing oil seal.
5. Install the axle shaft.
