Ranger 2WD L4-153 2.5L SOHC VIN C SFI (1998)
Reverse Idler Gear: Service and Repair
DISASSEMBLY
1. Disassemble the reverse idler gear.
1. Remove the reverse idler gear retaining ring.
2. Remove the spacer.
3. Remove the reverse idler gear and bushing.
4. Remove the reverse idler gear bearing.
5. Remove the reverse idler gear thrust washer.
ASSEMBLY
1. Assemble the reverse idler gear.
1. Install the reverse idler gear thrust washer.
2. Install the reverse idler gear bearing.
3. Install the reverse idler gear and bushing.
4. Install the spacer.
5. Install the reverse idler gear retaining ring.
Reverse Idler Gear Selective Retaining Ring Chart
