Ranger 2WD L4-153 2.5L SOHC VIN C SFI (1998)
Wiper Motor Linkage: Service and Repair
Mounting Arm and Pivot Shaft
REMOVAL
1. Cycle the windshield wiper blades until they are in the straight-up position.
2. Disconnect the battery ground cable.
3. Remove the RH and LH windshield wiper pivot arms.
1
Pull up on the pivot arm.
2
Pull out on the retainer tab.
4. Remove the RH access cover.
1
Remove the screws.
2
Remove the access cover.