Ranger 2WD L4-2.3L (2009)
Radio/Stereo: Removal and Replacement
Audio Unit
Audio Unit
Removal and Installation
CD6 or TREMOR
1. CAUTION: Before removing the audio unit, it must be placed in shipment mode. Failure to follow this instruction may result in damage
to the audio unit.
Put the audio unit in shipment mode. For additional information, refer to Audio Unit Shipment Mode See: Cellular Phone/Communications
Control Module/Service and Repair/Audio Unit Shipment Mode.
All audio units
2. Using the special tool, remove the audio unit.
-
Disconnect the electrical connector(s) and the antenna cable.
3. To install, reverse the removal procedure.
Satellite Digital Audio Receiver System (SDARS) Module
