Ranger 2WD L4-2.3L (2009)
Rear Door Limiter: Service and Repair
Door Check Arm - Rear, SuperCab
Removal and Installation
1. Remove the rear door trim panel.
2. Remove the door check arm-to-body bolt.
-
To install, tighten to 25 Nm (18 lb-ft).
3. Remove the 2 door check arm-to-door nuts.
-
To install, tighten to 9 Nm (80 lb-in).
4. Remove the door check arm.
5. To install, reverse the removal procedure.