Ranger 2WD L4-2.3L (2009)
Both B-pillar trim panels
6. NOTE: If the safety belt guide cover is damaged or if it does not remain closed, install a new cover.
Remove the front safety belt guide cover.
-
Release the tabs and remove the cover.
7. Remove the bolt and safety belt guide.
-
Use the Safety Belt Bolt Bit to remove the bolt.
-
To install, tighten to 40 Nm (30 lb-ft).
-
Remove the safety belt guide.
8. Disconnect the safety belt anchor.
1. Use the Safety Belt Bolt Bit to remove the bolt.
-
To install, tighten to 40 Nm (30 lb-ft).
2. Disconnect the safety belt anchor.
9. Reposition the B-pillar trim panel.
1. Remove the pin-type retainers.
2. Reposition the B-pillar trim panel.
