Ranger 2WD L4-2.3L (2009)
6. Remove the 2 bolts and the LH timing chain guide.
7. NOTICE: Do not rely on the Camshaft Alignment Plate to prevent camshaft rotation. The tool or the camshaft may be damaged.
If necessary, remove the 2 bolts and the camshaft sprockets.
-
Use the flats on the camshaft to prevent camshaft rotation.
Installation
1. Remove the Camshaft Alignment Plate.
2. NOTICE: Do not rotate the camshafts. The valves and pistons may be damaged.
If the camshaft sprockets were not removed, use the flats on the camshafts to prevent camshaft rotation and loosen the 2 sprocket bolts.
3. If removed, install the camshaft sprockets and the 2 bolts. Do not tighten the bolts at this time.
