Ranger 2WD L4-2.3L (2009)
6. Remove the shaft seal felt from the nose of the A/C compressor with the O-Ring Seal Remover.
7. Clean the compressor nose area.
8. Insert the tip of the A/C Compressor Snap Ring Remover into one of the snap ring eyes.
9. Rotate the A/C Compressor Snap Ring Remover to position the tool tip and the snap ring eye closest to the A/C compressor shaft.
10. Pull the A/C Compressor Snap Ring Remover up quickly while keeping the A/C Compressor Snap Ring Remover shaft against the side of the nose
opening and remove the snap ring.
11. Engage the A/C Compressor Shaft Oil Seal Remover into the inside diameter of the shaft seal.
12. Turn the A/C Compressor Shaft Oil Seal Remover handle clockwise to expand the A/C Compressor Shaft Oil Seal Remover tip inside of the shaft
seal.
