Ranger 2WD L4-2.3L (2009)
-
Is the resistance less than 5 ohms?
Yes
GO to E5.
No
REPAIR the circuit. TEST the system for normal operation.
-------------------------------------------------
E5 CHECK FOR CORRECT SJB OPERATION
-
Disconnect all the SJB connectors.
-
Check for:
-
corrosion
-
damaged pins
-
pushed-out pins
-
Connect all the SJB connectors and make sure they seat correctly.
-
Operate the system and verify the concern is still present.
-
Is the concern still present?
Yes
INSTALL a new SJB. TEST the system for normal operation.
No
The system is operating correctly at this time. The concern may have been caused by a loose or corroded connector.
-------------------------------------------------
