Ranger 2WD L4-2.3L (2009)
6. Clean and inspect the transmission fluid pan and magnet. Clean all mating surfaces.
Refill
1. NOTE: The transmission fluid pan gasket is reusable. Clean and inspect for damage, if not damaged, the gasket should be reused.
Install the transmission fluid pan.
1. Position the transmission fluid pan gasket on the transmission fluid pan.
2. Install and align the transmission fluid pan.
2. Loosely install the transmission fluid pan screws.
3. Tighten the transmission fluid pan screws in a crisscross sequence.
-
Tighten to 10 Nm (89 lb-in).
4. If equipped, position the servo heat shield over the servos and clip it to the pan rail.
-
Tighten to 10 Nm (89 lb-in).
5. Lower the vehicle.