Ranger 2WD L4-2.3L (2009)
12. NOTICE: Support the main control valve body until all of the screws are removed, otherwise damage to the main control valve body can
occur.
Remove the screws.
13. Remove the main control valve body.
Installation
1. Install the Valve Body Aligners into the transmission case.
2. Position the main control valve body, using the Valve Body Aligners as a guide.
3. NOTE: The main control valve body screws will be tightened in later steps.
Loosely install 4 M6 x 45 mm (1.771 in) screws.
4. NOTE: The main control valve body screws will be tightened in later steps.
Loosely install 2 M6 x 35 mm (1.377 in) screws.
5. Remove the Valve Body Aligners.
