Ranger 2WD L4-2.3L (2009)
2. Apply a new continuous bead of sealant of the specified thickness to the differential housing cover.
3. NOTE: The differential housing cover must be installed within 15 minutes of application of the silicone, or new sealant must be applied. If
possible, allow one hour before filling with lubricant to make sure the silicone sealant has correctly cured.
Install the differential housing cover and the 10 bolts.
-
Tighten to 45 Nm (33 lb-ft).
4. NOTE: For Traction-Lok(R) axles, before filling the rear axle with lubricant, first fill the rear axle with 118 ml (4 oz) of additive friction
modifier.
NOTE: Service refill capacities are determined by filling the rear axle with the specified lubricant to the level shown in the illustration.
Remove the filler plug and fill the rear axle with 2.4L (5 pt) with the specified lubricant and install the fill plug.
-
Tighten to 52 Nm (38 lb-ft).
