Ranger 2WD L4-2.3L VIN D (2001)
Cruise Control Servo: Service and Repair
REMOVAL
1. Disconnect the battery ground cable.
2. Disconnect the speed control servo electrical connector.
3. Remove the speed control cable cap from the speed control servo.
^
Push in the locking arm on the speed control cable cap then rotate the cap counterclockwise.
4. Remove the speed control cable.
1
Depress the spring retainer.
2
Slide the core wire end out of the speed control servo pulley and remove the speed control cable.
5. Remove the speed control servo bracket bolt and remove the servo.
