Ranger 2WD L4-2.3L VIN D (2001)
Wheel Fastener: Service and Repair
Rear
Special Tool(s)
Special Tool(s)
Removal
CAUTION: Never use a hammer to remove the wheel stud. Damage to the axle flange, hub flange, wheel bearing or hub bearing can result.
1. Raise the vehicle and install safety stands.
2. Remove the wheel and tire assembly.
3. Remove the rear brake drum.
4. Using C-Frame and Clamp Assembly Tool, press the wheel stud from its seat and discard.
Installation
CAUTION: Never use air tools to install wheel studs. The serrations can be stripped from the stud.
1. Insert a new wheel stud in the hole in the axle flange, making sure serrations are aligned with those made by the original wheel stud.
