Ranger 2WD L4-2.3L VIN D (2001)
3
Remove the affected seat.
WARNING: TO REDUCE THE RISK OF SERIOUS PERSONAL INJURY, READ AND FOLLOW ALL WARNINGS, CAUTIONS
AND NOTES AT THE BEGINNING OF THE REMOVAL PROCEDURE.
2. Detach the safety belt buckle and pretensioner electrical connector.
3. Install a shipping cap on the electrical connector.
4. Using special tool 501-010, remove the bolt and the safety belt buckle and pretensioner.
INSTALLATION
WARNING: TO REDUCE THE RISK OF SERIOUS PERSONAL INJURY, READ AND FOLLOW ALL WARNINGS, CAUTIONS AND
NOTES AT THE BEGINNING OF THE REMOVAL PROCEDURE.
1. Using special tool 501-010, install the bolt and the safety belt buckle and pretensioner.
2. Remove the shipping cap from the electrical connector.
