Ranger 2WD L4-2.3L VIN D (2001)
Install the lower ball joint.
1
Install the castellated nut.
2
Install a new cotter pin.
2. Install the upper ball joint.
1
Install the ball joint into the spindle.
2
Install a new pinch bolt and nut.
3. Remove the Coil Spring Compressor.
4. CAUTION: Always install the cotter pin into the tie-rod castellated nut from outboard to inboard, with the fingers bent together at a right angle.
Failure to do so will result in damage to the wheel and tire assembly.
Install the tie rod castellated nut.
1
Install the castellated nut.
2
Install a new cotter pin.
