Ranger 2WD L4-2.3L VIN D (2001)
Install the front suspension lower arm.
1
Position the front suspension lower arm to the front suspension crossmember.
2
Install the pivot bolts and nuts and tighten until snug.
2. CAUTION: Install the cotter pin into the lower ball joint from outboard to inboard with the fingers bent together at a right angle. Failure to do so
will cause damage to the wheel and tire assembly.
Connect the front suspension lower arm to the front wheel knuckle/spindle.
1
Position the lower ball joint into the front wheel knuckle/spindle.
2
Install the new castellated nut.
3
Install a new cotter pin.
3. Install the front shock absorber-to-front suspension lower arm nuts.
4. Install the stabilizer link bushing, washer, and nut.
