Ranger 2WD L4-2.3L VIN D (2001)
2. CAUTION: Make sure the parking lever actuating rod is correctly seated into the case parking rod guide cup.
Install the extension housing.
1. Position the extension housing.
2. Install the extension housing screws.
3. Install the extension housing studs.
3. Install the transmission mount.
1. Position the transmission mount on the extension housing.
2. Install the transmission mount-to-extension housing screws.
4. Install the transmission mount into the crossmember and tighten the transmission mount nuts.
5. NOTE: Align the driveshaft with the marks made during removal to ensure correct balance.
Align and install the rear driveshaft.
