Ranger 2WD L4-2.3L VIN D (2001)
16. Install the transmission fluid filter.
1. Install the transmission fluid filter.
2. Install the transmission fluid filter screw.
17. Install the transmission fluid pan.
1. Position a new transmission fluid pan gasket on the transmission fluid pan.
2. Install and align the transmission fluid pan.
18. Tighten the transmission fluid pan screws.
^
Use a crisscross sequence to tighten the transmission fluid pan screws.
19. If equipped, position the servo heat shield over the servos and clip it to the pan rail.
20. Lower the vehicle.
21. NOTE: When the battery has been disconnected and reconnected, some abnormal drive symptoms can occur while the vehicle relearns its
adaptive strategy. The customer needs to be notified that they may experience slightly different upshifts either soft or firm and this is a temporary
condition and will eventually return to normal operating condition.
