Ranger 2WD L4-2.3L VIN D (2001)
10. CAUTION: Do not overstretch the retaining spring.
Remove the transmission case (16 pin) electrical connector retaining spring.
11. CAUTION: Do not damage the connector or harness.
Remove the transmission case (16 pin) electrical connector.
^
Compress the tabs on the transmission case (16 pin) electrical connector.
^
Push the transmission case (16 pin) electrical connector out of transmission case.
Installation
1. NOTE: Make sure the tab is in the lock position.
NOTE: Install new O-rings on the transmission case (16 pin) electrical connector.
Install the transmission case (16 pin) electrical connector.
^
Lubricate the transmission case (16 pin) electrical connector O-rings with petroleum jelly.