Ranger 2WD L4-2.3L VIN D (2001)
1
Remove the screws.
2
Remove the access cover.
5. Reach through the RH access cover opening and unsnap the wiper motor clip from the RH mounting arm and pivot shaft.
6. Disconnect the (A) RH windshield wiper mounting arm and pivot shaft from the (B) LH windshield wiper mounting arm and pivot shaft and move
both away from the (C) windshield wiper motor.
7. Remove the windshield wiper motor.
^
Remove the stud bolt.
^
Remove the bolts.
INSTALLATION
1. To install, reverse the removal procedure.
