Ranger 2WD V6-177 2.9L (1989)
Grille: Technical Service Bulletins
Grille Assembly - Headlamp Attachment
Article No. 90-6-13
^
GRILLE - ATTACHMENT TO HEADLAMP ASSEMBLY - SERVICE TIPS
^
LAMP - HEADLAMP ASSEMBLY - ATTACHMENT TO GRILLE - SERVICE TIPS
LIGHT TRUCK:
1989-90 BRONCO II, RANGER
ISSUE:
The grille assembly is attached to the headlamp assembly with a plastic rivet. The plastic rivet cannot be reused. The affected vehicles are
1989-90 Ranger/Bronco II units except those equipped with the STX option.
ACTION:
Whenever service is required, re-attach the grille to the headlamp assembly with a screw and washer assembly (N801603-S100). If the
headlamp assembly does not have an attached nut, use a spring nut (N802538-S100).
1. Use a screwdriver to remove the plastic rivet.
2. Hold the nut in place by hand.
3. Install the screw.
PART NUMBER
PART NAME
CLASS
N801603-S55
Screw & Washer - Pkg. of 4
S
N802538-S100
Spring Nut - Pkg. of 4
S
OTHER APPLICABLE ARTICLES: None
WARRANTY STATUS: INFORMATION ONLY
OASIS CODES:
1050, 1052, 1800, 2160