ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Front Alignment - Specifications|Page 4353 > < Front Alignment - Specifications|Page 4351
Page 11
background image

____ Toe changed to ____.

___

Caster changed and split is ____.

___

Camber changed and split is ____.

3.

Tire circumference

____ Unlocked hubs check.

___

Tire circumference checked and two (2) closest circumference tires swapped to rear axle.

4.

Steering gear valve

____ Unlocked hubs check.

____ Install pressure gauge.

____ Check fluid level with engine off and on.

___

Apply torque to the steering wheel nut and check gauge readings.

___

Replaced the shaft and control assembly. 

____ Removed the pressure gauge.

5.

RABS linkage 

____ Replaced the RBS linkage.

6.

Brake imbalance

____ Unlocked hubs check.

____ Front wheel rotational drag check.

____ Master cylinder check.

____ Piston retraction check.

____ Rotors and linings swapped from side-to-side.

____ Rear brakes checked.

___

Rear drums and shoes swapped from side-to-side.

7.

Miscellaneous

___

Check for loose, damaged or worn parts.

Technical Service Bulletin # 892110

Date: 891018

Steering - Pull or Drift

Article No. 89-21-10

^

STEERING - PULL OR DRIFT - CASTER SPLIT - NEW

SERVICE ADJUSTERS - 4X4 MODELS

^

SUSPENSION - FRONT - NEW SERVICE CASTER ADJUSTERS - 4X4 MODELS

LIGHT TRUCK:

1980-89 BRONCO, F-150, F-250, F-350 1983-89 RANGER 1984-89 BRONCO II

Front Alignment - Specifications|Page 4353 > < Front Alignment - Specifications|Page 4351