Ranger 2WD V6-177 2.9L (1989)
Fig. 23 Front Stabilizer Bar Replacement. 4X2 Bronco II
Fig. 24 Front Stabilizer Bar Replacement. Explorer 4x2
BRONCO II & EXPLORER 4 X 2
1.
Remove stabilizer link assembly nut and washer, then disconnect stabilizer link assembly from front I-beam axle, Fig. 23 and 24.
2.
Remove stabilizer bar attaching bolts, then the stabilizer bar retainers from the stabilizer bar assembly.
3.
Remove stabilizer bar from vehicle.
4.
Reverse procedure to install.