ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Rear Suspension - Low Ride Height When Loaded|Page 4521 > < Driveline - Vibration/Shudder During Acceleration
Page 1
background image

Suspension Spring ( Coil / Leaf ): Customer Interest
Rear Suspension - Low Ride Height When Loaded

Article No. 
92-6-13

March 11, 1992

SUSPENSION - REAR - LOW ATTITUDE WHEN LOADED AT OR NEAR GVWR - 4X2 REGULAR CAB, SUPER CAB AND 4X4 REGULAR
CAB MODELS

LIGHT TRUCK:

1989-91 RANGER

ISSUE:

The vehicle may ride low in the rear when loaded at or near GVWR. This condition is caused by poorly computed camber dimensions for
the springs.

ACTION:

Install a rear spring shim (F1TZ-5W536-A) to each rear spring. Refer to the following procedure for service details.

On 1991 vehicles only, check the part number prefix located on either the bottom side of the last spring leaf near the center bolt or on the bottom side of
the spring clip.

^

If the part number prefix is F17A, do NOT add a rear spring shim.

^

Confirm that the height and weight is as specified in the Body Builder's Specification Book and the vehicle is not overloaded.

4X2 MODELS

1.

Remove the U-bolts attaching the springs to the axle.

2.

Install the rear spring shim (F1TZ-5W536-A) between each spring and the axle.

3.

Make sure the tab on the rear spring shim fits into the hole on the axle.

4.

Install new longer U-bolts (N807321-S56) and nuts (N620483-S150) to secure the springs to the axle.

5.

Tighten the U-bolts to 65-80 lb.ft. (88-108 N-m)

6.

Readjust headlights on the vehicle.

4X4 MODELS

1.

Remove the U-bolts attaching the springs to the axle.

2.

Install the rear spring shims (F1TZ-5W536-A) between each spring and the spacer.

3.

Make sure the tab on the rear spring shim fits into the hole on the spacer.

4.

Install new longer U-bolts (E9TZ-5705-C) and nuts (N620483-S150) to secure the springs to the axle.

5.

Tighten the U-bolts to 65-80 lb.ft. (88-108 N-m).

6.

Readjust headlights on the vehicle.

PART NUMBER

PART NAME

CLASS

F1TZ-5W536-A

Shim - Rear Spring (2 req.)

B

E9TZ-5705-C

U-Bolt (Ranger 4X4) (4 req.)

B

N807321-S56

U-Bolt (Ranger 4X2) (4 req.)

B

N620483-S150

Nut (Pkg/2, 8 req.)

RS

OTHER APPLICABLE ARTICLES: NONE
WARRANTY STATUS: Eligible Under Basic Warranty 

Coverage

OPERATION DESCRIPTION

TIME

920613A

Verify Part Number, Install

0.9 Hr.

Rear Suspension - Low Ride Height When Loaded|Page 4521 > < Driveline - Vibration/Shudder During Acceleration