Ranger 2WD V6-182 3.0L (1995)
Fan Clutch: Service and Repair
Removal
1. Remove the fan shroud as outlined in Removal and Installation, Radiator.
2. CAUTION: The large nut which attaches fan clutch to the hub of the water pump shaft has a left-hand thread and must be rotated clockwise for
removal.
Remove the nut using Fan Clutch Holding Tool T84T-6312-C and Fan Clutch Nut Wrench T84T-6312-D.
3. Remove the fan and fan clutch as an assembly.
4. Remove the bolts attaching the fan to the fan clutch , if necessary.
Installation
CAUTION: The fan clutch nut has a left-hand thread and must be rotated counterclockwise for tightening.
For installation, follow removal steps in reverse order. Tighten the fan-to-clutch bolts to 6-8 Nm (53-71 lb-in). Tighten the fan clutch assembly nut to
41-135 Nm (30-100 lb-ft).
