Ranger 2WD V6-182 3.0L (1995)
Center Mounted Brake Lamp: Service and Repair
Rear Hi-Mount Lamp
1. Remove two screws securing rear hi-mount lamp (13A613) to vehicle.
2. Pull lamp away from vehicle and disconnect wiring connector.
3. Replace miniature bulbs (13466) if required by rotating socket to remove from rear hi-mount lamp and pull miniature bulb from socket.
Installation
1. Press miniature bulb into socket. Place socket into rear hi-mount lamp and rotate to secure in place.
2. Position gasket on rear hi-mount lamp and connect wiring connector.
3. Position rear hi-mount lamp on vehicle and install two screws.
