Ranger 2WD V6-182 3.0L (1995)
Backup Lamp Switch: Service and Repair
Manual Transmission
5-Speed Manual Transmission
Removal and Installation
Backup Lamp Switch
1. NOTE: The backup lamp switch (15520) is located on the shift cover left side.
Place the transmission (7003) in any position other than reverse or neutral and disconnect the backup lamp switch to rear lamp feed wire from the
backup lamp switch.
2. Remove the backup lamp switch from the transmission.
For installation, follow removal procedures in reverse order. Tighten the new backup lamp switch to 11-16 N.m (8-12 lb-ft).