Ranger 2WD V6-182 3.0L (1995)
EGR Tube: Service and Repair
REMOVAL
^
Disconnect the EGR valve to exhaust manifold tube at the EGR external pressure valve and exhaust manifold.
^
Disconnect hoses and remove EGR valve to exhaust manifold tube.
^
Remove EGR valve tube to manifold connector from exhaust manifold.
NOTE: EGR valve to exhaust manifold tube and EGR transducer hoses must be routed behind transmission kickdown cable.
INSTALLATION
^
To install, reverse removal procedure. Tighten EGR valve tube to manifold connector and EGR valve to exhaust manifold nuts to 34-48 Nm
(25-35 ft lb). Tighten EGR transducer retaining bolt to 20-30 Nm (15-22 ft lb).
