Ranger 2WD V6-182 3.0L (1995)
EGR Valve: Service and Repair
REMOVAL
^
Disconnect the EGR valve to exhaust manifold tube from the EGR external pressure valve.
^
Remove the EGR valve retaining bolts and the EGR external pressure valve from the upper intake manifold.
^
Remove the EGR valve gasket and clean gasket sealing surface of upper intake manifold. If the old EGR external pressure valve is to be
installed, clean the gasket sealing surface.
INSTALLATION
^
Position EGR external pressure valve, with a new EGR valve gasket, onto upper intake manifold and install retaining bolts. Tighten retaining
bolts to 20-30 Nm (15-22 ft lb).
^
Connect the EGR valve to exhaust manifold tube to the EGR external pressure valve. Tighten EGR valve to exhaust manifold tube nut to
34-47.6 Nm (25-35 ft lb).
