Ranger 2WD V6-182 3.0L (1995)
Fuel Injection Supply Manifold Assembly: Service and Repair
REMOVAL
1. Release pressure from fuel system at fuel pressure relief valve (schrader) on fuel rail assembly.
2. Remove upper intake manifold/throttle body assembly. See: Throttle Body/Service and Repair
3. Disconnect fuel supply and fuel return lines using appropriate spring lock coupling disconnect tool. Remove fuel line safety clips.
Engine With Upper Intake Manifold Removed
4. Carefully remove electrical harness connectors from individual injectors.
5. Disconnect vacuum line from fuel pressure regulator valve.
6. Remove four fuel injection supply manifold retaining bolts (2 per side).
Fuel Rail And Injectors
7. Carefully disengage fuel injection supply manifold assembly from fuel injectors by lifting and gently rocking the manifold.
8. Grasping injector body, pull up while gently rocking injector from side to side.