Ranger 2WD V6-182 3.0L (1995)
Inertia Fuel Shutoff Switch: Service and Repair
WARNING: Do not reset the inertia switch button if you see or smell fuel.
1. Turn ignition switch to OFF.
2. Check for leaking fuel in the engine compartment, fuel lines and fuel tank.
3. If no fuel is apparent, reset the Inertia Fuel Shutoff (IFS) switch by pushing the reset button on top of switch.
4. Turn ignition switch to START for a few seconds, then to OFF.
5. Again, check for leaking fuel.
