Ranger 2WD V6-182 3.0L (1995)
Spark Plug Wire Routing
2. Install each ignition wire to the proper terminal on the ignition coil. The terminals on the ignition coil and the ignition wire are numbered. Make
sure the boots are fully seated and that both ignition coil boot locking tabs are engaged.
CAUTION: Proper installation of ignition wires is critical to vehicle operation. If one ignition wire is not properly installed one spark plug or
ignition coil, both spark plugs connected to that segment of the ignition coil may not fire under load.
3. Route the ignition wires.
4. Connect the spark plugs to the ignition wires.
