Ranger 2WD V6-182 3.0L (1995)
-
Clears the Freeze Frame Data.
-
Clears Oxygen Sensor Test data.
-
Resets status of the OBD II system monitors.
-
Sets DTC P1000.
PCM Reset Procedure
-
Turn key Off.
-
Perform the necessary vehicle preparation and visual inspection.
-
Select VEHICLE & ENGINE SELECTION menu (OPTIONAL).
-
Select NEW VEHICLE YEAR & MODEL.
-
Select year, engine, model with the appropriate qualifier, if needed (i.e., transmission, 49 State, California) (OPTIONAL).
-
Follow operating instructions from the menu.
-
Select GENERIC OBD II FUNCTIONS.
*
Press CONT button if all OBD II monitors are not complete.
-
Turn key On.
-
Select CLEAR DIAGNOSTIC CODES.
-
Press START Key.