Ranger 2WD V6-182 3.0L (1995)
3. NOTE: After each rotation, back tap off slightly to remove new cuttings and be sure to blow out any chips before performing Step 3. The drive
"kees" on the insert will act as an automatic stop.
4. Select one of the thread inserts provided in the Rotunda D-Ring Installation Kit 134-00018 or equivalent and hand screw it into the re-tapped hole
until it is slightly below the surface of the hole.
5. After insertion of the thread insert, use a 12 oz. hammer to lightly tap the installation tool (provided in the kit) several times to drive down the
insert "kees."
6. NOTE: It the two hex-head attaching bolts on the front seat shoulder strap adjuster are not stripped, install the front seat shoulder strap adjuster to
the body structure as outlined in Removal and Installation. If the front seat shoulder strap adjuster attaching bolts are stripped, replace the front
seat shoulder strap adjuster and install it to the body structure as outlined in Removal and Installation.
