Ranger 2WD V6-182 3.0L (1995)
Camshaft Position Sensor
1. Attach Syncro Positioning Tool T95T-12200-A.
CAUTION:
-
If the replacement synchronizer assembly housing does not contain a plastic locator cover tool, a special service tool such as Syncro
Positioning Tool T95T-12200-A must be obtained prior to installation of the replacement synchronizer assembly. Failure to follow this
procedure will result in the fuel system being out of time with the engine, possibly causing engine damage.
-
Do not move crankshaft until entire assembly procedure is complete. Doing so will result in the fuel system being out of time with the engine
resulting in possible engine damage.
