Ranger 2WD V6-182 3.0L (1995)
6.
Remove upper and lower glass guide bracket assembly nuts and remove old glass guide bracket assembly (Figure 2).
7.
Install a new Guide Bracket Assembly (F87Z-1023288-AA) by first inserting window regulator arm into window channel bracket before riveting
glass. Refer to Figure 3.
8.
Push the glass rearward within the front door glass bracket assembly until it bottoms out within the front door.
9.
Fasten glass to bracket using two (2) Rivets (W525175-S).
10.
Move the upper guide bracket assembly post rearward within the retention slot in the inner panel.
11.
Tighten the two (2) glass bracket assembly nuts to 8-10 N.m (71-89 lb-in).
12.
Reconnect the battery ground cable.
13.
Cycle the front window up and down to check position.
14.
Reinstall the front door trim panel.
PART NUMBER
PART NAME
FS7Z-1023288-AA
Guide Bracket Assembly
W525175-S
Rivet