Ranger 2WD V6-182 3.0L (1995)
Clutch: Service and Repair
Coast Clutch
DISASSEMBLE
Exploded View Of Coast (overdrive) Clutch
1. Remove pressure plate retainer ring, then the plate pack.
2. Inspect steel clutch plates and clutch lining plates for wear, damage, or effects of overheating, replacing entire set if necessary.
NOTE: If new plates are to be used, immerse them in transmission fluid for 30 minutes before assembly.
Clutch Spring And Compression Spring Retainer Replacement
3. Using clutch spring compressor tool No. T65L-77515-A or equivalent, compress clutch compression springs, remove retaining ring, and carefully
release pressure on spring, then remove spring and compression spring retainer.