Ranger 2WD V6-182 3.0L (1995)
1. CAUTION: SS3 may pop out of its bore. This may damage the solenoid.
Use a 10mm socket to remove the SS1 and SS3 solenoid clamp screws. Remove the solenoid clamp and the solenoids.
2. NOTE: The TCC solenoid may pop out of its bore.
The converter modulator valve may come out after the TCC solenoid has been removed. This may damage the solenoid or converter modulator
valve.
Remove the TCC, CCS, SS2 and EPC solenoid clamp screw.
