Ranger 2WD V6-182 3.0L (1995)
14. CAUTION: The solenoid clamp must be installed in the TCC and EPC solenoid grooves, shift solenoid pockets and the No. 204 plug.
Install the solenoid clamp. Tighten the solenoid clamp screw to 8-11 Nm (71-97 lb-in).
15. Install shift solenoids 1 and 3.
16. Install the solenoid clamp. Tighten the clamp screw to 8-11 Nm (71-97 lb-in).
