ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Driveline - Vibration/Boom|Page 5407 > < Driveshaft - Boom/Vibration At 20-65 MPH|Page 5402
Page 1
background image

Technical Service Bulletin # 97-20-16

Date: 970929

Driveline - Vibration/Boom

Article No. 
97-20-16

09/29/97

^

NOISE - "BOOM" WHEN DRIVING 32-105 KM/H (20-65 MPH) - SUPERCAB 4X2 MODELS WITH A4LD OR MAZDA R1 TRANSMISSION
- VEHICLES BUILT FROM 12/15/89 THROUGH 3/30/93

^

VIBRATION WHEN DRIVING 32-105 KM/H (20-65 MPH) - SUPERCAB 4X2 MODELS WITH A4LD OR MAZDA R1 TRANSMISSION -
VEHICLES BUILT FROM 12/15/89 THROUGH 3/30/93

^

DRIVESHAFT - "BOOM"/VIBRATION WHEN DRIVING 32-105 KM/H (20-65 MPH) - SUPERCAB 4X2 MODELS WITH A4LD OR MAZDA
R1 TRANSMISSION - VEHICLES BUILT FROM 12/15/89 THROUGH 3/30/93

LIGHT TRUCK: 
1989-97 RANGER

This TSB article is being republished in its entirety to include vehicles through the 1997 model year and to update the Service Procedure.

ISSUE: 
A driveline "boom" or vibration may be experienced when driving 32-105 km/h (20-65 mph) in some vehicles. This may occur because of driveline
sensitivity of the vehicle.

ACTION: 
Follow the Diagnostic Chart in this TSB article. Install revised design components as required to provide better isolation and improved driveline angles
to resolve the concern. Refer to the following Service Procedure for details.

NOTE

THE SERVICE REPLACEMENT DRIVESHAFTS CONTAINED IN THIS TSB ARTICLE WILL NOT FIT VEHICLES EQUIPPED WITH A
MITSUBISHI MANUAL TRANSMISSION. IF DRIVESHAFT REPLACEMENT IS REQUIRED ON MITSUBISHI EQUIPPED MODELS,
REFER TO THE PARTS CATALOG FOR CORRECT APPLICATION.

Driveline - Vibration/Boom|Page 5407 > < Driveshaft - Boom/Vibration At 20-65 MPH|Page 5402