ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Input Shaft, M/T|Testing and Inspection|Page 5454 > < Synchronizer Ring, M/T|Testing and Inspection
Page 1
background image

Input Shaft: Testing and Inspection

WITH M5OD, 5-SPEED - WITH M5OD, 5-SPEED

INSPECTION 
Check input shaft for spline damage. If needle bearing surface in bore of bearing is worn or rough or if cone surface is damaged, replace input shaft.

Input Shaft, M/T|Testing and Inspection|Page 5454 > < Synchronizer Ring, M/T|Testing and Inspection