Ranger 2WD V6-182 3.0L (1995)
2. Install TR Sensor Alignment Tool (MLPS Alignment Tool) T93P-70010-A into the three slots on the TR sensor. Tighten the TR sensor bolts to
8-11 N-m (71-97 lb in). Remove the alignment tool.
3. Install the manual control outer lever and manual control outer lever nut. Tighten the manual control outer lever nut to 41-54 N-m (30-40 lb ft).
4. Install shift cable or linkage from manual control lever. Use a screwdriver and remove the cable and fitting from the transmission lever ball stud.
5. Adjust shift cable.
6. Reconnect vehicle harness connector to TR sensor.