ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Power Windows - Chattering When Operated|Page 9754 > < Power Windows - Chatter/Binding When Operating|Page 9749
Page 1
background image

Window Track: All Technical Service Bulletins
Power Windows - Chattering When Operated

Article No.
98-19-6

09/28/98

GLASS - DOOR - "CHATTERING" WHEN OPERATING 
WINDOW IN DOWN MODE - VEHICLES EQUIPPED 
WITH POWER WINDOWS BUILT THROUGH 1/5/98

LIGHT TRUCK:
1995-98 RANGER

This TSB article is being republished in its entirety to revise the Service Procedure.

ISSUE

The driver's and/or passenger's door glass may "chatter" when operating the window in down mode. This may be caused by a lack of lubrication on the
glass guide bracket assembly.

ACTION

Replace the glass guide bracket with a new bracket. The revised bracket has a type of lubricant that reduces resistance of the two metals when rubbing
against each other. This should help reduce the possibility of window chatter. Refer to the following Service Procedure for details.

SERVICE PROCEDURE

1.

Lower the window and stop at about half way down.

2.

Disconnect the battery-ground cable.

3.

Remove the interior door trim panel. Refer to the appropriate Ranger Service/Workshop Manual and Figure 1.

4.

Drill out the two (2) door glass rivets.

5.

It is not necessary to remove the door glass. Manually move the glass to the full up position and secure glass to frame with tape or clamps.

Power Windows - Chattering When Operated|Page 9754 > < Power Windows - Chatter/Binding When Operating|Page 9749