Installing Brake Drum on Ranger 2WD V6-245 40L (1990)
Brake Drum: Service and Repair
Installation
For additional information see Notes, Warnings, and Hints.
Brake Drum Removal/Installation
1. If brake shoes have been replaced or the adjusting screw has been moved the shoes should be adjusted. To do this use a suitable brake drum to
shoe gauge, measure brake drum inside diameter. Adjust brake shoes to dimension obtained on outside portion of gauge.
2. Install the brake drum.
3. Install the brake drum retaining nut.
4. Install the tire and wheel assembly
5. Lower vehicle.
