Ranger 2WD V6-245 4.0L (1990)
NOTICE: Do not turn adjuster nut to make castellations line up with hole in spindle.
9. Remove the retainer from the nut and reindex retainer without removing nut. Repeat until castellations line up with hole in spindle.
10. Install a new cotter pin. Bend the cotter pin ends in opposite directions around the castellated flange of the retainer.
11. Check front wheel rotation. If wheel rotates properly, reinstall the grease cap and wheel cover. If rotation is noisy or rough, remove, inspect and
lubricate the bearing cones and cups.
12. Install the caliper.
13. Install wheel and tire assembly.
14. Check brakes for proper operation.
WARNING: Before moving vehicle, pump brake pedal several times to be sure it is firm. Do not move vehicle until a firm pedal is
obtained.
