Ranger 2WD V6-245 4.0L (1990)
____ Toe changed to ____.
___
Caster changed and split is ____.
___
Camber changed and split is ____.
3.
Tire circumference
____ Unlocked hubs check.
___
Tire circumference checked and two (2) closest circumference tires swapped to rear axle.
4.
Steering gear valve
____ Unlocked hubs check.
____ Install pressure gauge.
____ Check fluid level with engine off and on.
___
Apply torque to the steering wheel nut and check gauge readings.
___
Replaced the shaft and control assembly.
____ Removed the pressure gauge.
5.
RABS linkage
____ Replaced the RBS linkage.
6.
Brake imbalance
____ Unlocked hubs check.
____ Front wheel rotational drag check.
____ Master cylinder check.
____ Piston retraction check.
____ Rotors and linings swapped from side-to-side.
____ Rear brakes checked.
___
Rear drums and shoes swapped from side-to-side.
7.
Miscellaneous
___
Check for loose, damaged or worn parts.
Technical Service Bulletin # 98-5A-22
Date: 980318
Vehicle - Pull Or Drift Diagnostics/Service Procedures
Article No.
98-5A-22
03/18/98
^
BRAKES - PULL OR DRIFT - DIAGNOSTIC AND
SERVICE PROCEDURE
^
STEERING - PULL OR DRIFT - DIAGNOSTIC AND
SERVICE PROCEDURE
LIGHT TRUCK:
1988-94 RANGER