Ranger 2WD V6-245 4.0L (1990)
Suspension Spring ( Coil / Leaf ): Customer Interest
Driveline - Vibration/Shudder During Acceleration
Article No.
93-18-15
09/01/93
VIBRATION OR SHUDDER DURING ACCELERATION FROM START-UP - 4X2 SUPERCAB
LIGHT TRUCK:
1989-93 RANGER
This TSB article is being republished in its entirety to include 1993 model-year vehicles.
ISSUE:
A vibration or shudder may be noticed on acceleration from a dead stop. This may be caused by improper driveline angles which become excessive
during acceleration.
ACTION:
Install new improved stiffer rear springs to maintain proper driveline angles during acceleration.
1.
Replace rear springs with new springs (F1TZ-5560-L). Refer to the appropriate year Service Manual, section 04-02, for service details.
2.
Readjust headlamps on the vehicle.
PART NUMBER
PART NAME
CLASS
F1TZ-5560-L
Spring Assembly - Rear
C
SUPERSEDES: 92-11-13
WARRANTY STATUS:
Eligible Under Bumper To Bumper For 1992 And 1993 Models, Basic Warranty Coverage For 1989/91 Models
OPERATION DESCRIPTION
TIME
931815A
Replace Both Rear Springs
2.0 Hrs.
And Realign Headlamps
DEALER CODING
BASIC PART NO.
CONDITION CODE
5560
02
OASIS CODES:
304000, 509000, 597997, 703000, 703200